High Capacity 3-Temp Water Dispenser
929CR Stand Fountain (Ice / Room / Hot) (110V-120V)- 5-Stage RO system inside of unit
929CRStanding Plastic Water Fountain (Cold / Warm / Hot) 5-stage RO system ( with Disposable Cartridge Filter ) inside of Unit
Bottle-less water dispenser with filtration provides hot, room and cold temperature water from your tap that is safe, clean and great tasting |
Specification
- The water dispenser is suitable for office, school or factory, where needs big volume of water
- Size: (L) 380 x (W)420 x (H)1140 mm
- Hot Water Temp: 85oC ~ 100oC
- Cold Water Temp: 4oC
- Double secure prevents from overheat or dry-heat (by sensor and thermostat).
- Double secure against water overflow (by sensor and floating valve).
- Automatic control for purified water refill.
- Chilling system by compressor with R-134R refrigerant.
- Chilling capacity: 5.5L/hour, chilled water under 10oC.
- Each hot, ambient and chilled water has its own individual tank.
- Heating capacity: 5.5L/hour. Hot water dispenser can be assigned (at 82oC, 85oC, or 90oC)
- Hot water tap with safety device.
- Re-boil function up to 100oC.
- Capacity of each tank: 4L/cold tank, 3L/hot tank, 10L/room tank.
- Reservoir tank: 17 L
RO Features:
- 50 GPD/TFC membrane
- 5 micron sediment filter
- Two GAC in-line filters
- fully assembled
- All hardware included
- Automatic tank full control
- Booster pump (CWC-929P only
|
|
|
|